Materials: You will need 2-3 fat quarters
Please follow the directions given in Class #1 for creating the 4 Half Square Triangle Units using two different fabrics. Here is a brief refresher...
Cut two rectangles measuring 6" x 12" and mark as shown below, marking at 6" to divide the rectangle and marking the diagonals as shown below. Use a marking device that will not bleed on your fabric.
Stitch a 1/4" seam on both sides of the diagonal lines as shown below...
Cut on the solid lines that you marked, starting with the center line and then the two diagonals as shown below...
Take them to the ironing board, press to set your seams and then press open with the seams to the darker side of your set.
Square up each of your half square triangle blocks.
Cut two strips each of 2 different color fabrics, they should measure at least 3" x 12" each.
We are going to sew one strip of each color, using a 1/4 inch seam allowance, together along the long edge as shown below to create strip sets:
Iron, pressing your seams to one side, typically you will press your seam to the darker side. Your strip set should measure 5 1/2 inches wide, it's okay if it's wider you can trim it down to 5 1/2 inches wide.
Next, take your ruler and measure off 5 1/2 inches, cut and repeat. You should have 4 strip set units measuring 5 1/2 inches square.
When you have completed that, please cut one square of fabric to measure 5 1/2 inches square.
You should have the following components ready to assemble:
1- 5 1/2 inch square
4- half square triangle units
4-strip set units
As with the blocks taught in class #1, there are several layout options...Here are some layout options with this block. You will notice, again, how different the blocks look depending on where you choose to put the components. Play around and find what you like, then lay them out on your cutting mat next to your machine and we will proceed to sew them together as we did in Class #1.
Changing color emphasis
Turning the block "On Point"
So we see that by combining a strip set unit, a half square triangle unit and a plain square, we can get a completely different looking block than the first two that we played with in our first class. In the block below, I have fussy cut the center and the associated strips for a completely different look.
Okay, so that was great! You remembered everything from Class #1 and you have quickly constructed another block for your quilt! Here is a quilt made with only the Greek Cross Block...you can see how lovely it is. This quilt was put together by Amy Friend with blocks made by many different gals. It really turned out beautiful.
Any of the blocks that we have constructed so far will look lovely on their own, repeated to make a quilt.
Extras for today: Some basics before you sew.
#1. Clean all of the lint out of your machine before you begin, take out the bobbin and use a soft brush to remove any fiber build up. Remove the throat plate and use your brush again to remove any build up. Make it a habit to do this each time you change your bobbin and you will have better results.
#2. Use a new needle...they don't last forever. Select the correct needle for the job. Here is a great link with a wonderful needle guide. I suggest you print it out and place it in your binder for reference.
http://www.schmetzneedles.com/learning/household-needle-chart.htm and http://www.schmetzneedles.com/learning/needle-primer.htm Having the right needle in your machine will make a huge difference in your stitch quality.
#3. Use the right thread for the job. Again, here is a great link for you to check out
http://quiltbug.com/Articles/thread-theory.htm
If you are quilting along with us online...Please be sure to post your blocks to our Flickr site at http://www.flickr.com/groups/newbyqb/ I love to see your creations! We will be uploading some more student blocks this weekend after class, be sure to check back with us!
Our Next Newby Quilting Bee will be held on Friday March 9th!
No comments:
Post a Comment